background image

 

2.   Reference Guide 

2.1  This manual can also be found at : 

CD\NAPDOS\7188X\manual\hardware\iobus_e.pdf 

ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/7188x/manual/hardware/iobus_e.pdf

 

 

2.2  Software Installation & Demo Programs: 

2.2.1 Software 

Installation: 

 

Refer to “7521/7522/7523/7524/7527 Software User’s Manual” for software installation. 

The software driver will be updated frequently. Software driver and User’s manual 

download at: CD\NAPDOS\7188X\manual and 

ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/7188x/manual

 

2.2.2 Demo 

program: 

X series for I-7188XA 

ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/7188x/minios7/7188xa/demo/bc/ioexpbus/

X series for I-7188XB 

ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/7188x/minios7/7188xb/demo/bc/ioexpbus/

X series for I-7188XC 

ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/7188x/minios7/7188xc/demo/bc/ioexpbus/

X series for I-7188EX 

ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/7188e/minios7/demo/bc/ioexpbus/

X series for I-7188XG ( English_manu, Driver, Demo ) 

ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/isagraf/7188xg/

X series for I-7188EG ( English_manu, Driver, Demo ) 

ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/isagraf/7188eg/

2.2.3 

Performance:

 

CD \Napdos\7188x\manual\hardware\x-Performance 

ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/7188x/manual/hardware/x-performance/

I/O Expansion Bus for 7188X/7188E User’s Manual, Jan/2005 v1.5, 7PH-000-15---13 

Summary of Contents for 7188X



















































































































Reviews: