![background image](http://html1.mh-extra.com/html/icp-das-usa/7188e/7188e_hardware-user-manual_3581912032.webp)
Step 9: Disconnect INIT*-pin form GND-pin.
Step 10: Power off then power on.
Step 11: Execute
ping 192.168.255.1 –t
in host-PC as follows:
Note:
Execute Ping 192.168.255.1
in host-PC
Ping results must be smooth
& continuous
192.168.255.1
is the default IP of the 7188E. Users can change IP (step 8).
If host-PC cannot ping the 7188E without problems, please refer to step 8 to
change the configuration of the 7188E. So it is compatible with host-PC
(the mask of the 7188E must be compatible with the mask of host-PC)
The MAC address of the 7188E should be unique in the same network.
Refer to step 8 for changing the MAC address of 7188E.
Every MAC address of the 7188E is unique in the default shipping.
In general, if host-PC can ping the 7188E smoothly and continuously, all
other software and drivers for the 7188E will work fine. Therefore, users
should make sure host-PC can ping the 7188E smoothly before any further
testing.
7188E Series Hardware User’s Manual, 2004, v2.2, 7MH-016-22 ----- 32