background image

  

7188E Series 

 

 

7188E Series Hardware User’s Manual 

 

7188E Series New Features

 

 

 

1. Virtual COM Technology 

 

Your Powerful Tools

 

2. Ethernet I/O Technology

 

 

 

3. Web-server Technology

 

 

Create New Ideas

 

4. MiniOS7 & Xserver Inside

 

 

 

5. I/O Expansion Bus  Inside

 

 

Create New Applications

 

6. Time to market & Cost Effective Solution

 

 

 

 

Warranty

 

All products manufactured by ICP DAS are under warranty regarding 
defective materials for a period of one year, starting from the date of 
delivery to the original purchaser. 

 
Warning 

ICP DAS assumes no liability for damages resulting from the use of this 
product. ICP DAS reserves the right to change this manual at any time 
without notice. The information furnished by ICP DAS is believed to be 
accurate and reliable. However, no responsibility is assumed by ICP 
DAS for its use, nor for any infringements of patents or other rights of 
third parties resulting from its use. 

 
Copyright

 

Copyright 2002 by ICP DAS. All rights are reserved. 

 
Trademark

 

The names used for identification only may be registered trademarks of 
their respective companies. 

7188E Series Hardware User’s Manual, 2004, v2.2, 7MH-016-22  -----  1 

Summary of Contents for 7188E


























































































Reviews: