GW-7553-CPM PROFIBUS/CANopen GATEWAY User Manual
(Version 1.00, Apr/2016)
PAGE: 27
a. Save to Device
：
Save the CANopen setting to GW-7553-CPM.
b. Save Project File
：
Save the CANopen setting to project file of PC.
2. Load:
a. Load From Device
：
Load the CANopen setting from GW-7553-
CPM.
b. Load Project File
：
Load the CANopen setting from project file of
PC.
3. Test:
a. When user clicks this button, the PC will test all the CANopen
commands of user setting.
4. Log:
a. When user clicks this button, the PC will log the CANopen messages
between GW-7553-CPM and CANopen slave.
5. Diag:
a. When user clicks this button, the PC will read the diagnosis messages
from GW-7553-CPM, and display on PC.
5.2.2 Connection control
：
1. Connect button:
When the user clicks this button, the PC will open the com port and try
to connect the GW-7553-CPM module.
2. Disconnect button:
When the user clicks this button, the PC will break the connection of
theGW-7553-CPM and close the com port.
3. Com port select:
The PC will finds usable com port.
5.2.3 Device state
：
It can display the number of modules in the GW-7553-CPM and display
module parameters in the window of the module.
1. Edit GW-7553-CPM Parameter
Right click on the GW-7553-CPM, as shown in figure 18, 19.
(a) CANopen Device Count:
The number of CANopen Slave in GW-7553-CPM, The max
amount is 10.
ГК
Атлант
Инжиниринг
–
официальный
представитель
в
РФ
и
СНГ
+7(495)109-02-08 [email protected] www.bbrc.ru
