Installation of Icotera optical CPE and FTU
11
Icotera A/S, Kongevejen 400D, 2840 Holte, Denmark - [email protected]
Document version: 1.0
Figure 9. Kerfs along cut-lines inside the FTU cover
When cutting out openings, take precautions to avoid injuries and not to damage FTU, furniture, or
any other objects. Use a retractable hobby knife or any other type of knife that is suitable for the
task. Try to make the opening as clean and even as possible; do not leave jagged edges, as these
may obstruct straight insertion of the SC/APC adapter which will lead to problems with closing of the
FTU case.
To make cutting of the openings easier, guide the knife at an angle
of about 45º to the side of the
cover wall, as shown in the following figures.
Figure 10. Avoid cutting at ang
le close to 90°
Figure 11.
To make cutting easier hold knife at angle of about 45°