iCoolsport 5 Series, Owner'S Manual

Page: 25 / 40

25
The Start Up Sequence performs the following steps:
1
Introducing Air Flow: first, the main airflow fan will start to
carry away the heat from the cooling process..
2 Starting Water Flow: your machine will automatically start
the water circulation pump and the water should start flowing
in your pool. If everything runs correctly, the message “ Water
flow started” will appear on the screen
3
Starting System: after a few seconds, the first refrigeration
compressor motor will start. After 30 seconds, the second
refrigeration compressor will start. If everything runs correctly,
the message “System started” will appear on the screen
4
Starting System Check: your machine will run a full system
check to make sure everything is running correctly.
If the systems detects a safety issue or a lack of water flow, it will
stop the start up sequence and the screen will inform you of the
reason and provide advice.
If the start up sequence has been successful, the
screen will show the message “SYSTEM STARTED”
In this case, everything has tested correctly and the machine is
now chilling to the set temperature.
That’s it!
Your machine will now do all the rest and there is nothing else
for you to do. It has been designed to always be on and ready
to use.
Your Turbo has been manufactured using quality components
from the world’s leading manufacturers and is therefore
capable of continuous 24/7 operation.
The Turbo has a sophisticated computer control system that
senses and manages all parameters necessary to reduce
electric power consumption to the minimum possible while
still maintaining the set temperature accurately at sporting
facilities all over the world.
All Turbo machines are Twin engine machines and thanks
to the 2 completely independent heat pumps in the single
cabinet of the turbo, in the unlikely event of a component fault
in one heat pump, the second heat pump can continue to chill
or heat your pool effectively until the fault is diagnosed.
If you wish to have your pool available at your desired
temperature at any time of the day or night then you can leave
it running continuously at very low operating cost. The Turbo
is so efficient that if you use it every day, it will cost less to
operate if you leave it running continuously.
START UP SEQUENCE ERROR
If the start up sequence fails, please check these 4
steps:
1 If the water does not flow steadily when you first
start up, this is usually due to air being trapped in the
pipes or not sufficient water in your pool. Your machine
will attempt to clear any air trapped in the pipes
automatically 3 times. If not successful, the screen will
let you know there’s a water flow issue.
2
Listen and wait to hear the refrigeration motor
sound. If the the system doesn’t sound, contact iCool
Support.
3
Make sure you can feel airflow coming from the
back panel of your machine. If this is not the case,
please contact iCool Support.
When contacting iCool Support, please send pictures
and a short video of the screen as it starts up. This will
help engineers to better determine the problem and
give you the best advice and assistance quickly.