iControl Technicolor TCA200 User Manual Download Page 61

Page: 61 / 104

Managing Devices

Figure 10: Camera: Edit New Camera Screen

Table 8: Edit New Camera Options

Field

Description

Can Be
Modified?

Model

Model ID for the new camera. The camera manufacturer and model infor-
mation are sent to the server and logged for inventory reporting and tech
support purposes.

Camera
Name

Name previously assigned to the camera device.

Yes

Video
Quality

Level of video detail captured by the camera.

Yes

7. Tap the

Camera Name

fields to display a keyboard screen and rename the Camera zone to some-

thing that clearly differentiates it from any other camera. Tap

Done

to accept your changes.

8. Tap the

Video Quality

field to modify the level of video detail captured by the device.

a. Tap

High

Medium

Low.

Use a value with a network upload speed that is less than the

recommended upload network speed.

The Adjust Camera Video Quality screen is displayed.

Summary of Contents for Technicolor TCA200









































































































Search results

Summary of Contents for Technicolor TCA200

Reviews:

Related manuals for Technicolor TCA200

Brands by name

Popular brands

iControl Technicolor TCA200, User Manual

Search results

Summary of Contents for Technicolor TCA200

Reviews:

Related manuals for Technicolor TCA200

Brands by name

Popular brands