iControl Standard, Operation Manual

Page: 9 / 28

9
02 KEY TO THE iControlStandard PANEL
02.1
Switches
_
02.2 Indicator lights
_
02.3 Measuring Devices
_
The iControlStandard panel incorporates the following measuring devices:
• A timer to record the total number of hours of use of the pivot. This is very helpful for scheduling maintenance for the
pivot and all its components.
• An analog 600 V voltmeter to monitor the supply voltage to the panel.
WARNING: Do not start the machine if the voltage is below 360V or above 415V, for 50Hz supplies, or below 450V or above 505V if
using 60Hz. That could cause damage to the electrical components.
Main switch
Auto-Start or Manual Mode
Direction and Auto-Reverse Switch
iControlRemote
Dry, Wet, Aux
Start Switch
Safety Override
Machine activated
Counterclockwise or clockwise
Last tower moving
Safety