Iconic 1100 Bay, Installation, Servicing And User Instructions Manual

Page: 28 / 48

IE & GB
28
3.5 Fuel Bed Arrangements.
When arranging the Media (Fuel Effect) into the Firebed, it is imporant that the Pilot area is kept clear and
that no Media enters the Pilot shield. The Pilot area includes the the pilot shield and the top of the burner to
the first slot inside the fence of the pilot shield.
When commissioning or servicing the Appliance Cross Lighting must be checked to ensure smooth lighting of
the main burner from the Pilot Flame and smooth lighting of the effect burners from the main Burner.
Shown above is the Log set Used for the Heat Design Iconic 1100, This will include: 1 Bag of Grey Embers,1 Bag
of Black Embers, 11 Logs and a Bag of Glow Strands.
Shown Below are 2 log arrangements, the Bay arrangenent is intended for the Bay, Single Front and Corner
Models. The Room Divider arrangement is intended for Room Divider and See Through models.
After the Embers and Logs have been positioned as per the following arrangements, the Glow Strands can be
layed amongst the logs to cause enhanced glow.
Pebbles, Stones, Gravel, Crushed Glass and Lava are all shown in the Instruction Manual as either White or
Black. Other colours may however be available. The layout will remain the same as described in this manual.
A A
A
B
C
D
D
E
F
F F
Log set Identification