
7.2 CORRECT USE OF KEY COMPONENTS
RECHARGE PHASES:
A. The battery can be charged on board and externally, ie; you can, but do not have to,
remove the battery from the scooter to charge it. The charging connector must be connected to the scooter or battery interface.
B. Insert the plug of the battery charger into the 220 V household socket.
The red indicator on the charger is on, indicating that it is charging.
C. When the battery is fully charged, the green indicator light will turn on.
D. Disconnect the plug of the charger power cord from the wall outlet, then the cable connector from the scooter.
PRECAUTIONS:
A. Do not operate the engine while charging.
B. The charger must not be covered during charging and must be kept away from flammable agents.
C. The battery and charger should not be placed on plastic products, clothes and other fuels when charging.
D. Never contact the charging interface with metallic objects.
E. The person other than the professional maintenance technician cannot possibly open the charger; otherwise, it could be damaged.
F. Before installing, removing or servicing the battery, make sure that it has been disconnected from the power supply
(the electric scooter may be damaged by electric shock if the operations mentioned above are conducted when
the battery is connected to the AC power supply).
Summary of Contents for VOJAGER
