iconBIT MOVIE3D PRO
English
8
5.
At the Code-reading status, please press "Vol+" button, the LED light flash by one time,
and then press TV remote control "Vol+" button, the Universal RC LED light will flash by 3
times. Then the "Vol+" button code is coped by the Universal R/C.
6.
At the Code-reading status, please press "Vol-" button, the LED light flash by one time,
and then press TV remote control "Vol-" button, the Universal RC LED light will flash by 3
times. Then the "Vol-" button code is coped by the Universal R/C.
7.
Last step is to press the button SET on the Universal RC is to save the setup for all buttons
code.
Note
: For the special equipment RC code, this remote control cannot support and copy. And
for accurate and efficient code-reading, please make sure the RC Full battery charged.
