6
Front Panel
1. HI-Z input
This is a high impedance input for guitar/bass.
2. “HI-Z/MIC” input switch
Mic or HI-Z input switch for input 1-8.
3. Input gain level controls 1-8
These potentiometers control the input level of their associated analog Mic/Inst/
Line input.
4. 48V phantom power switch
Press to 48V phantom power to the associated XLR (Rear panel) input.
This phantom power circuit is suitable for most condenser microphones.
5. Sig (Signal LED indicator)
When lit, this LED indicates the presence of an audio signal at the associated
MIC/INST input.
6. Clip (Clip LED indicator)
When lit, this LED indicates clipping input level at the associated MIC/INST
input. The LED will illuminate when the signal is 3dB below the clipping point.
1
3 6 4
8
9
2
5
7
10
1
3 6 4
8
9
2
5
7
10
7. Master level control
This potentiometer controls the master output level (output Ch.1-2) of the analog
outputs.
