ICON PROFORM SPORT 7.0c User Manual Download

Page: 28 / 36

SYMPTOM: The walking belt slows when walked on

a. Use only a surge suppressor that meets all of the

specifications described on page 17.

b. If the walking belt is overtightened, treadmill per-

formance may decrease and the walking belt may

become damaged. Remove the key and UNPLUG

THE POWER CORD. Using the hex key, turn both

idler roller screws (C) counterclockwise, 1/4 of a

turn. When the walking belt is properly tightened,

you should be able to lift each edge of the walking

belt 2 to 3 in. (5 to 7 cm) off the walking platform.

Be careful to keep the walking belt centered. Then,

plug in the power cord, insert the key, and walk on

the treadmill for a few minutes. Repeat until the

walking belt is properly tightened.

c. Your treadmill features a walking belt coated with

high-performance lubricant. IMPORTANT: Never

apply silicone spray or other substances to

the walking belt or the walking platform unless

instructed to do so by an authorized service

representative. Such substances may deterio-

rate the walking belt and cause excessive wear.

If you suspect that the walking belt needs more

lubricant, see the front cover of this manual.

d. If the walking belt still slows when walked on, see

the front cover of this manual.

SYMPTOM: The walking belt is not centered

between the foot rails

a. IMPORTANT: If the walking belt rubs against

the foot rails, the walking belt may become

damaged. First, remove the key and UNPLUG

THE POWER CORD. If the walking belt has

shifted to the left, use the hex key to turn the

left idler roller screw clockwise 1/2 of a turn; if the

walking belt has shifted to the right, turn the

left idler roller screw counterclockwise 1/2 of a

turn. Be careful not to overtighten the walking belt.

Then, plug in the power cord, insert the key, and

walk on the treadmill for a few minutes. Repeat

until the walking belt is centered.

SYMPTOM: The walking belt slips when walked on

a. First, remove the key and UNPLUG THE POWER

CORD. Using the hex key, turn both idler roller

screws clockwise, 1/4 of a turn. When the walk-

ing belt is correctly tightened, you should be able

to lift each edge of the walking belt 2 to 3 in. (5 to

7 cm) off the walking platform. Be careful to keep

the walking belt centered. Then, plug in the power

cord, insert the key, and walk on the treadmill for a

few minutes. Repeat until the walking belt is prop-

erly tightened.

2–3 in.

Summary of Contents for PROFORM SPORT 7.0c





































Search results

Summary of Contents for PROFORM SPORT 7.0c

Reviews:

Related manuals for PROFORM SPORT 7.0c

Brands by name

Popular brands

ICON PROFORM SPORT 7.0c, User Manual

Search results

Summary of Contents for PROFORM SPORT 7.0c

Reviews:

Related manuals for PROFORM SPORT 7.0c

Brands by name

Popular brands