10
6
6. Orient the Handlebar (47) as shown.
Tip: Avoid pinching the Pulse Wire (32).
Attach the Handlebar (47) to the Upright (3) with
two M8 x 18mm Screws (46).
32
46
47
3
7
7. The Console (6) can use four D batteries (not
included); alkaline batteries are recommended.
Do not use old and new batteries together or
alkaline, standard, and rechargeable batter-
ies together.
IMPORTANT: If the Console has
been exposed to cold temperatures, allow
it to warm to room temperature before you
insert batteries. Otherwise, you may dam-
age the console displays or other electronic
components.
Remove the screws (B) and the
battery covers (C), insert batteries into the bat-
tery compartments, and then reattach the battery
covers.
Make sure to orient the batteries as
shown by the diagrams inside the battery
compartments.
To purchase an optional power adapter, call
the telephone number on the cover of this
manual. To avoid damaging the Console (6),
use only a manufacturer-supplied regulated
power adapter.
Plug one end of the power
adapter into the receptacle (D) inside the indi-
cated battery compartment, and route the power
adapter through the notch (E) in the battery
cover. Then, plug the other end into an outlet
installed in accordance with all local codes and
ordinances.
6
B
C
D
E
Summary of Contents for PRO-FORM CYCLE TRAINER 400 Ri
Page 4: ...4 STANDARD SERVICE PLANS...
