9
103
111
101, 102
7
8. While a second person holds the Handlebar (70)
near the Upright (66), route the wires (C) in the
Handlebar through the Upright as shown.
Tip: Avoid pinching the wires. Attach the
Handlebar (70) to the Upright (66) with three
M8 x 25mm Cap Screws (109) and three
M8 x 16mm Washers (110); start all the Cap
Screws, and then tighten them.
70
66
C
109
110
7. Attach the Front Shield Cover (103) to the Right
and Left Front Shields (101, 102) with four
M5 x 12mm Screws (111); start all the Screws,
and then tighten them.
See assembly steps 4 and 5. Tighten the
M4 x 12mm Self-tapping Screws (79) and the
M4 x 16mm Screws (56).
8
Avoid pinching
the wires
111
