12
12
12. See the inset drawing. To avoid pinching the
wires, make sure that the wires (C) from the
Handlebar (70) are arranged as shown.
Attach the Accessory Tray (99) to the Upright
(66) with two M5 x 12mm Screws (111); start
both Screws, and then tighten them.
66
70
70
111
99
C
C
Avoid
pinching
the wires
13
100
13. Tip: Avoid pinching the wires. Attach the
Rear Upright Cover (100) to the Accessory Tray
(99) and the Upright (66) with four M5 x 12mm
Screws (111); start all the Screws, and then
tighten them.
111
99
66
Avoid pinching
the wires
