34
SYMPTOM: The displays of the console do not
function properly
a.
If the console does not boot up properly, or if the
console freezes and does not respond, reset the
console to the factory default settings.
IMPORTANT: Doing this will erase all the
custom settings you have made to the console.
Resetting the console requires two people. First,
power off the treadmill. Next, locate the small reset
opening (B) on the console. Using a bent paper clip
(C), press and hold the reset button inside the
opening, and have a second person power on the
treadmill. Continue holding the reset button until
the console turns on. When the reset operation is
complete, the console will turn off and then turn
back on. If it does not, power the treadmill off and
then on again. Once the console turns on, check
for
fi
rmware updates (see HOW TO USE THE
MAINTENANCE SECTION on page 28). Note: It
may take a few minutes for the console to be ready
for use.
SYMPTOM: The console does not stay in place
a.
If the console does not stay in the desired position
because it is too loose, use a hex key to slightly
tighten the console in the indicated location on both
sides (only one side is shown).
B
C
a
a
Summary of Contents for NordicTrack COMMERCIAL 2950
Page 5: ...5 all STANDARD SERVICE PLANS...
Page 37: ...37 NOTES...
