10
hands-free) you can mute the microphone by pressing
the Mute key. The Mute key will light red when mute is
active.
Transfer (Blind Transfer):
1. While on an active call press the Transfer key.
2. The system will prompt you to enter the number where
you would like to transfer the call.
3. Use the dial pad to dial an extension or outside
telephone number and press OK.
4. Hang up to complete the transfer.
Transfer (Supervised Transfer):
1. While on an active call place the first call on hold by
pressing the Hold key.
2. The IP2032 will automatically switch to the second
channel. Use the dial pad to dial an extension or
outside telephone number and press OK.
3. When the called party answers you can speak to the
called party before transferring.
4. Press the Transfer key to complete the transfer.
Voice Mail:
1. Press the OK/Message key or dial the voice mail
access code ______ to access your voice mailbox.
2. When prompted, enter your voice mailbox pass code.
Volume Adjustment While on a Call:
1. During a conversation (handset, headset, or
hands-free), you can adjust the receive audio through
the handset, headset or speaker using the volume
control key.
2. Press the volume c key to raise the volume or
volume control – key to lower the volume. The audio
level will display on the LCD. Please note that the
lowest level turns the receive audio OFF.
7
IP2032 I/O Ports
The side view and the connectors of the IP2032 are as follows:
No
Part Name
Description
1 CON
Not used.
2
RJ-45
Ethernet Port
RJ-45 Jack 10/100 Mbps Ethernet port for
connecting to PC. It could be used as a switch for
a PC to access the IP network.
3
RJ-45
Ethernet Port
10/100 Mbps Ethernet port for connecting the
IP2032 to an IP network. This port also supports
Power-over-Ethernet (PoE) (IEEE802.3af
standard).
4
Power Input
The IP2032 can be powered by the 5V/2A power
adapter (included with the IP2032). This device
supports a power auto-switch function and can
switch from AC power to PoE (if available).
