ICON iKeyboard3S, Instructions Manual

Page: 9 / 55

9
MUTE button - Activate and deactivate the mute state of the associated channel. The
switch will light blue when the channel is muted.
Master button - Switch the touch fader to control the DAW master fader.
Transport control buttons section
Automation section
READ button -
Press the READ button to activate the read function of the current audio
track.
WRITE button -
Press the WRITE button to activate the write function of the current audio
track.
Other control buttons
Jog button - Activate to use the encoder as a jog wheel.
The jog wheel is used for various purposes specific to the DAW application, including
shuttle and scrubbing functions.
Program button - Use together with the encoder to change the sound bank of your soft-
synth.
( Tip: Please refer to Appendix A for Mackie Control and HUI protocol functions.)
6. Modulation jogwheel
Rotate to adjust the modulation effect.
7. Pitch jogwheel
Rotate to adjust the pitch bend. It returns to default, “0” when released.
8. Octave buttons
Raise or lower the pitches played on your keyboard.
9. Transpose button
Raise or lower the pitches (by less than an octave) played on your keyboard.
( Tip: While pressing and holding the “Transpose” button, press a keyswitch within an
octave range from the original c1 position) to change the c1 to that particular switch.)
Note: Only the first zone could be changing the pitch if several zones are set.
PLAY button - Activate the play function of the DAW.
STOP button - Activate the stop function of the DAW.
REC button - Activate the record function of the DAW.
REWIND button - Activate the rewind function of the DAW.
FAST FORWARD button - Activate the fast forward function of the DAW.
LOOP button -
Activate the loop function of the DAW.