HelmLink Bluetooth Communication System | 15
2 INSTALLING THE HEADSET ON YOUR HELMET
13. Peel off the cover of the hook and loop fastener for the
speaker (L)
and the speaker pad to expose the adhesive surface. Then, attach
the fastener to the ear pocket inside the helmet.
Note:
Make sure the fastener covers the microphone’s cable in the
ear pocket before you attach it to the ear pocket as shown in the
illustration.
14. Attach the
speaker (L)
and the speaker pad to the hook and loop
fastener used for the speaker inside the helmet.
15. After putting the
Antenna (L)
into the hole, put the speaker’s
connector and cable into the same hole as shown in the illustration.
2
1
16. Put the
Button Module (L)’s connector
into the cavity of the helmet.
Then, put the remains of the cables into the crack in the helmet, and
organize the cables.
1
2
