HelmLink Bluetooth Communication System | 60
14 CONFIGURATION SETTING
14.2.11 Smart Volume Control (Default: Disable)
Enabling
Smart Volume Control
automatically changes the level of the
speaker volume based on the level of the environment noise. You can
enable it by setting the sensitivity to
low
,
medium
or
high
.
14.2.12 Sidetone (Default: Disable)
Sidetone
is audible feedback of your own voice. It helps you to naturally
speak at the correct level according to varying helmet noise conditions.
If this feature is enabled, you can hear what you are speaking during an
intercom conversation or a phone call.
14.2.13 Voice Prompt (Default: Enable)
You can disable
Voice Prompts
by software configuration settings, but
the following voice prompts are always on.
- headset configuration settings menu, battery level indicator, speed
dial, FM radio functions
14.2.14 RDS AF Setting (Default: Disable)
Radio Data System (RDS) Alternative Frequency (AF) Setting
allows
a receiver to re-tune to the second frequency location when the first
signal becomes too weak. With RDS AF enabled on the receiver, a radio
station with more than one frequency can be used.
14.2.15 FM Station Guide (Default: Enable)
When
FM Station Guide
is enabled, FM station frequencies are given
by voice prompts as you select preset stations. When
FM Station Guide
is disabled, the voice prompts on FM station frequencies will not be
given as you select preset stations.
14.2.16 Advanced Noise Control™ (Default: Enable)
When
Advanced Noise Control
is enabled, the background noise
is reduced during an intercom conversation. When it is disabled, the
background noise is mixed with your voice during intercom.
