9
5. With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the
Frame (54) so that the treadmill is more stable.
Do not fully fold the Frame until the treadmill
is completely assembled.
Have a second person hold the Left Upright
(111) against the Base (85), with the Left
Upright positioned as shown.
Attach the Left Upright (111) to the Base (85)
with two 3/8" x 2 1/2" Bolts (10) and two 3/8" Star
Washers (9).
If the Bolt (A) does not slide in
easily, see the instructions in step 4.
Firmly
tighten the 3/8" x 2 1/2" Bolts (10).
Attach a Wheel (92) to the Base (85) with a 3/8"
x 2 1/4" Bolt (6) and a 3/8" Nut (5).
Do not over-
tighten the Nut; the Wheel must turn freely.
With the help of a second person, tip the tread-
mill so that the Base (85) is flat on the floor.
5
10
92
5
9
85
111
6
54
A
6. Hold the Right Handrail (107), which is marked
with a “Right” sticker, near the console assem-
bly. Insert the console wire into the hole in the
side of the Right Handrail and out of the hole in
the top.
Attach the Console Ground Wire (102) to the
bracket on the Right Handrail (107) with the #8 x
1/2" Ground Screw (16).
Set the Left and Right Handrails (106, 107) on
the console assembly. Start two #8 x 3/4"
Screws (1) into each Handrail.
Do not fully
tighten the Screws yet. Be careful not to
pinch the console wire.
Remove the wire ties from the Left and Right
Handrails (106, 107). If necessary, press the
Cage Nuts (35) back into place.
Console
Assembly
Console
Wire
6
1
1
107
102
106
16
35
35
1
1
All manuals and user guides at all-guides.com
