9
Mac driver installation
Cube4Nano-VST is a class compliance device. Thus there is no driver installation
needed for Mac. Also, it is fully supporting iOS devices by connecting to a
camera kit.
Please follow the step-by-step procedures below to install your Cube4Nano-VST
USB recording interface.
1. Turn on your Mac
(
Note:
Do not connect the Cube4Nano-VST digital audio interface to your Mac
yet.)
2. Class compliance device
Cube4Nano-VST is class compliance on Mac OSX, no driver installation is
needed.
3. Copy the software control panel shortcut logo to your
desktop
Open the previous “Mac” folder. Copy the “ProDriver VST” software panel
shortcut logo and paste it to your desktop.
4. Launch the software control
panel
Click the Cube4Nano-VST’s software
control panel shortcut logo you have
just copied to your desktop to launch
the software control panel.
Diagram 1
Mac
Diagram 2