Pull to lift up the dual antennas. For optimum RF reception, pull both antennas to
their up most vertical position.
Use this standard unbalanced high impedance (5-10K Ohm)1/4 jack to connect
the receiver to your amplifier or audio mixer. Wiring is as follows: tip hot, sleeve
ground.
8. Antennas:
9. Output Jack:
"
Beetles Receiver
Fig 3
11
10
10. Squelch Control:
11. DC Input:
This control determines the maximum range of the receiver before audio signal
dropout. Usually, you should leave this as the factory default setting. Also, you
may adjust it by a small screwdriver.
Connect the provided ICON's DC power adapter here.
Fig 2
9
8
User's Manual
4
