Push to turn on the receiver power. (Note: Output Jack (9) must be inserted for the
receiver to power up)
Adjust the output level of the Receiver to your Guitar Amp etc.
This LED lights when receiving signal from Transmitter.
This LED lights when output signal from Transmitter is at the onset clipping
(i.e. Distortion occurred).
This LED lights when receiver battery is running low.
This LED lights when the receiver is switched on.
Push the latch in the direction as indicated arrow shown below and pull to open the
latch.
1. Power Switch:
2. Volume Switch:
3. RF LED:
4. PEAK LED:
5. BATT. LOW LED:
6. ON LED:
7. Battery Compartment Latch:
Insert standard 9V alkaline battery into the compartment (package provided). Please
insert the battery in the right direction as the + & - polarity markings shown, wrong
Insert direction will cause severe damage to your Beetles receiver and will void your
warranty. Also, you may power your receiver by the ICON power adapter provided.
Beetles Receiver
RF
ON
1
2
3
4
5
6
7
Fig1
User's Manual
3
Photo
