3-segment LED display
“Mic/Inst” inputs 1/2
Input gain level controls 1/2
48V phantom power switch
Channel 1/2 & 3/4 switch for HP monitor 1
Channel 1/2 & 3/4 switch for HP monitor 2
The 3-segment LED display shows the parameter values as you adjust them and
also provides feedback about channel selections, operating modes, and more.
Unbalanced instrument and mic level inputs. These hybrid connectors will accept
a standard 3-pin XLR plug or a 1/4” TS connector.
These potentiometers control the input level of their associated analog Mic/Inst
/Line input.
Press to 48V phantom power to the associated XLR input. This phantom
power circuit is suitable for most condenser microphones.
Switch to select output channel 1/2 or 3/4 to be listened on HP monitor 1.
Switch to select output channel 1/2 or 3/4 to be listened on HP monitor 2.
Top Panel Layout
Note: The function operates slightly differently between DAWs. Please refer to your
DAW manual for each function. The following description is based on the functions
that operate in Steinberg Cubase .
TM
