iC ON AIO Ver 1.00
iC ON AIO Ver 1.00
Getting Started
Connecting your aio6 controller
Install aio6 driver on your Mac/PC. For installation details, please refer to pg. 9.
(Note: Please do not connect your aio6 to your Mac/PC before you have installed the driver.)
Connect the aio6 to your Mac/PC via the USB port.
Choose a USB port on your Mac/PC and insert the wide (flat) end of the USB cable.
Connect the cable's other end to the aio6. Your Mac/PC should automatically
“see” the new hardware and notify you that it is ready to use.
Setup your DAW
Activate the ICON aio controller in your
DAW or MIDI software using “MIDI setup”
or “MIDI devices”.
For Cubase and Nuendo , choose Mackie
Control at the “Device List”.
TM
TM
(Note: Every application does this a little
differently, so refer to your software user
manual for the settings.)
Setup your audio settings
Select ICON ASIO driver on your DAW.
Computer(MAC or PC)
USB
Power Adaptor
