Rear Panel Layout
Line inputs 3/4
Line outputs 1-4
S/PDIF coaxial I/O connectors
MIDI I/O connectors
USB 2.0 Connector
12V/5A power adaptor
EX-Control pedal connector
These are unbalanced analog inputs on standard 1/4 TS connectors at
″
–10dB line level.
These are unbalanced analog outputs on standard 1/4 TS connectors at
″
+6dBU line level.
S/PDIF digital input and output on coaxial RCA connectors. The digital input
is selected via the aio6's software control panel, while the digital output
will be sent to the coaxial.
MIDI input and output on standard 5-pin DIN connectors
Connect it with the provided USB cable to your Mac/PC's USB connector.
Your Mac/PC must have a USB2.0 connector in order to run the full speed
of aio6.
Connect the provided power adaptor here.
This jack is able to connect up to 3- ICON foot pedals SPD-01 to activate
your selected functions.
Optional EC-3 splitter cable is needed if 3 pedals are using)
(Note: aio6 is not able to work without the provided power adaptor connected.
The USB bus power is not able to provide sufficient power supply for aio6.)
(
