3
9.
With the hole drilled, take the supplied 3/8” self-tap flanged bolt and reservoir bracket and install onto the frame.
10.
Using the supplied hose clamps, clamp the reservoir onto the bracket as shown (If desired, the supplied heat shrink material can
be cut to fit over the hose clamps).
[FIGURE 9 & 10]
11.
With the shocks installed. Reinstall the wheels and tires, lower to the ground and torque the lug nuts to factory spec.
FIG.10
FIG.9
RETORQUE ALL NUTS, BOLTS AND LUGS AFTER 100 MILES AND PERIODICALLY THEREAFTER.
VERIFY ALL FASTENERS ARE PROPERLY TORQUED BEFORE DRIVING VEHICLE.
