ICON ProAudio Platform X+, User Manual

Page: 94 / 122

94
<<<<<<<<< Automation >>>>>>>>>>
Ease creating and managing automation is a highlight of using a control surface with motor faders.
Press the Automation buttons to change the automation behavior of the selected track.
Automation Modes:
Read = Toggle between Read and Off :
Set to Read , the channel will respond to existing automation in real time. Any parameters with
automation will jump to existing automated values during playback.
Set to
Off , the channel will ignore all automation.
Write = All channel parameters record automation during playback. This overrides and replaces all
automation. This is for tracking an unassisted mixdown performance.
Touch = The channel reads existing automation, plus writes automation for specific parameters
adjusted during playback. This only creates automation while parameters are being edited.
Latch = Reads existing automation, plus writes automation for specific parameters adjusted during
playback. This continues to write automation for any parameters which have been changed during
playback.
Trim = Trim allows automation to be modified instead of overwritten. Adjusting knobs and faders
during playback will make a change relative to existing automation.
Off = Disable track automation. Set to Off, the channel will ignore all automation.
Plug-In Assignment:
Plug-In = Select a channel, then press Plug-In . Next press Plug-In Assign to view the selected
channel’s inserts 1-4 on the LCD Display .Turn the Encoder Knobs to add/select plug-in effects.
Press Plug-In Assign to confirm. Turn Encoder Knob 5 to access insert 5 on knob 1. Press an
Encoder Knob 1-4 to edit the selected plugin. Parametersappear on the LCD Display above track
1-4. Turn the Encoder Knobs to edit the lower parameter, press the Encoder Knobs to toggle
the upper parameter. Turn Encoder Knob 5 to access further pages of parameters on knobs 1-4.
Press Encoder Knob 5 to return to viewing inserts for the selected channel.
While a plugin is open:
Bypass = Toggle Plug-In Bypass
Compare = Toggle previous plugin parameter settings
Send Assignment:
Assign + Send A-E = Activates Send Routing , edit send destination for each track with the
Encoder Knobs . Press Assign to confirm.
Send A-E = Activates Send Assignment , Turn the Encoder Knobs to adjust the send level to the
corresponding send destination for eachtrack.
Press Flip to access the currentSend Faders on themotor faders.