
7
4. While a second person holds the Console (23)
near the Upright (2), connect the wire on the
Console to the Upper Wire (44).
Insert the wires into the Upright (2).
Tip: Avoid pinching the wires.
Attach the
Console (23) to the Upright (2) with four M4 x
16mm Screws (42).
Turn the Resistance Knob (63) counterclock-
wise to the lowest setting before going to
the next step.
4
23
2
44
63
42
5
1
2
48
Avoid pinching the
wires and cables
Avoid pinching
the wires
44
64
33
53
48
55
45
5. While a second person holds the Upright (2)
near the Frame (1), connect the Upper Wire
(44) to the Reed Wire (53).
Next, connect the Resistance Cable (45) to the
Lower Resistance Cable (55) in the following
way:
•
See drawing A.
Pull upward on the metal
bracket on the Lower Resistance Cable (55),
and insert the tip of the Resistance Cable (45)
into the wire clip inside the metal bracket.
•
See drawing B. Firmly
pull the Resistance
Cable (45) and slide it into the metal bracket
on the Lower Resistance Cable (55).
•
See drawing C.
Using pliers, squeeze
together the prongs on the upper end of the
metal bracket.
Tip: Avoid pinching the wires and cables.
Insert the cables and wires into the Frame (1).
Next, slide the Upright (2) onto the Frame.
Attach the Upright (2) with four M10 x 15mm
Patch Screws (48), an M10 x 68mm Button Bolt
(64), and an M10 Locknut (33).
Do not tighten
the Patch Screws or the Locknut yet.
A
B
C
55
45
45
Metal
Bracket
Metal
Bracket
55
All manuals and user guides at all-guides.com