15
MAINTENANCE
Regular maintenance is important for optimal
performance and to reduce wear. Inspect and properly
tighten all parts each time the exercise bike is used.
Replace any worn parts immediately.
To clean the exercise bike, use a damp cloth and a
small amount of mild soap. IMPORTANT: To avoid
damage to the console, keep liquids away from
the console and keep the console out of direct
sunlight.
CONSOLE TROUBLESHOOTING
Most console problems are the result of low batteries.
To replace the batteries, see assembly step 10 on
page 10.
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted.
To adjust the reed switch, you must remove the left
pedal, the resistance knob, and the left shield.
Using an adjustable wrench, turn the left pedal clock-
wise and remove it.
Next, press the tabs
(A) on the sides of the
resistance control and
pull the Resistance
Knob (14) upward off
the resistance control.
See the EXPLODED DRAWING on page 19.
Identify the Left Shield (9). Remove the two M3.5 x
19mm Screws (43) and the three M4 x 19mm Screws
(27) from the Left Shield. Then, remove the Left Shield.
Next, locate the Reed Switch (33). Rotate the Pulley
(24) until a Magnet (32) is aligned with the Reed
Switch. Loosen, but do not remove, the indicated
M4 x 19mm Screw (27). Then, slide the Reed Switch
slightly toward or away from the Magnet.
Then, retighten the M4 x 19mm Screw (27). Turn the
Pulley (24) for a moment. Repeat these actions until
the console displays correct feedback.
When the reed switch is correctly adjusted, reattach
the left shield, the resistance knob, and the left pedal.
A
14
A
32
24
27
33
MAINTENANCE AND TROUBLESHOOTING
Summary of Contents for Weslo pursuit g 3.1
Page 4: ...4...
