background image

17

 HOW TO FOLD THE TREADMILL

Before folding the treadmill, remove the key and 

unplug the power cord. CAUTION: You must be 

able to safely lift 45 lbs. (20 kg) to raise, lower, or 

move the treadmill. 

1.    Hold the metal frame (A) firmly in the location 

shown by the arrow below. CAUTION: Do not hold 

the frame by the plastic foot rails. Bend your 

legs and keep your back straight. Raise the 

frame about halfway to the vertical position.

2.   Hold the treadmill firmly with your right hand as 

shown. Next, pull the latch knob (B) to the left and 

hold it. Raise the frame until the latch plate (C) is 

past the latch pin (D). Then, slowly release the 

latch knob; make sure that the latch plate is rest-

ing against the latch pin. 

   To protect the floor or carpet, place a mat under the 

treadmill. Keep the treadmill out of direct sunlight. 

Do not leave the treadmill in the storage position in 

temperatures above 85°F (30°C).

HOW TO MOVE THE TREADMILL 

 Before moving the treadmill, fold it as described at 

the left. CAUTION: Make sure that the latch plate is 

resting against the latch pin. Moving the treadmill 

may require two people.

1.    Hold the frame (A) and one of the handrails (E), 

and place one foot against a wheel (F). 

2.     Pull back on the handrail (E) until the treadmill will 

roll on the wheels (F), and carefully move it to the 

desired location. CAUTION: Do not move the 

treadmill without tipping it back, do not pull on 

the frame (A), and do not move the treadmill 

over an uneven surface.

3.    Place one foot against a wheel (F), and carefully 

lower the treadmill.

HOW TO LOWER THE TREADMILL FOR USE

1.  

See drawing 2. Hold the upper end of the treadmill 

with your right hand as shown. Pull the latch knob 

to the left and hold it. Next, lower the frame until 

it is past the latch pin (D). Then, release the latch 

knob (B).

2.  

See drawing 1 at the left. Hold the metal frame 

firmly with both hands, and lower it to the floor. 

CAUTION: Do not hold the frame by the plastic 

foot rails, and do not drop the frame. Bend your 

legs and keep your back straight. 

C

B

2

B

C

D

1

E

A

F

 HOW TO FOLD AND MOVE THE TREADMILL 

1

A

Summary of Contents for PRO-FORM CADENCE LT





























Reviews: