8
104
4. Set the Rear Stabilizer (5) into the bracket on the
Frame (1), and attach it with an M10 x 100mm
Screw (102); do not fully tighten the
Screw yet.
Finish attaching the Rear Stabilizer (5) with two
M10 x 60mm Screws (103); do not fully tighten
the Screws yet.
Then, fully tighten all three Screws (102, 103).
4
103
102
5
91
5
1
5. Tip: Avoid damaging the tabs on the
Stabilizer Cover (91).
Orient the Stabilizer Cover (91) as shown, press
it onto the Rear Stabilizer (5), and attach it with
four M4 x 19mm Screws (104); start all the
Screws, and then tighten them.
5
104
