7
STEP 1
Before assembly the Stabilizer, remove the
Cylinder fixed on the bottom tube and keep the
bolts and washers.
Tighten the Front bottom tube (23) to the
Mainframe (1) with Allen bolts (21) and Arc washer
(20); and then attach the Rear bottom tube (3)
to the Mainframe (1) with Allen bolts (4) and Arc
washers (34) as show.
STEP 2
First, slide the Mast cover (49) onto the Handlebar
post (46),
Then connect the Connection wire (50) and sen-
sor wire (53)
Tighten the Handlebar post (46) to the Mainframe
(1) with Allen bolts (45) , Spring washer (44), and
Flat washer (12) ; Then slide down the Mast cover
(49) in position.
STEP 3
Pass the pulse wire (43) through out of the
console bracket on top of Handlebar post (46) as
show;
Tighten the Fixed handlebar (42) to the Handlebar
post (46) with Allen bolts (45) and Spring washers
(44)
Summary of Contents for NordicTrack E 300
Page 20: ...20 EXPLODED DRAWING...
Page 21: ...21 EXPLODED DRAWING...