background image

24

9

OPERATION AND ADJUSTMENT

THE PERFORMANT LUBE

TM

WALKING BELT

Your treadmill features a walking belt coated with PERFORMANT LUBE

TM

, a high-performance lubricant. IMPOR-

TANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such
substances will deteriorate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD 

This product must be earthed. If it should malfunction or break
down, earthing provides a path of least resistance for electric 
current to reduce the risk of electric shock. This product is equipped
with a cord having an equipment-earthing conductor and an earth-
ing plug.  

Two power cords are included. Select the one that will fit your
outlet. See drawing 1. Plug the indicated end of the power cord
into the socket on the treadmill. Next, lift the tab on the ferrite
box and clamp the ferrite box around the power cord. See
drawing 2. Plug the power cord into an appropriate outlet that
is properly installed and earthed in accordance with all local
codes and ordinances. Important: The treadmill is not compati-
ble with GFCI-equipped outlets.

If the power cord is damaged, it must be replaced with a manufac-
turer-recommended power cord. 

DANGER:

Improper connection of the equip-

ment-earthing conductor can result in an increased risk
of electric shock. Check with a qualified electrician or
serviceman if you are in doubt as to whether the prod-
uct is properly earthed. Do not modify the plug provided
with the product—if it will not fit the outlet, have a
proper outlet installed by a qualified electrician.

1

2

Socket on treadmill

Outlet

Tab

Ferrite Box

HOW TO LOWER THE TREADMILL FOR USE

1. Hold the upper end of the treadmill with your right hand as

shown. Using your left hand, pull the lock knob to the left
and hold it. Pivot the treadmill down until the frame is past
the pin on the lock knob.

2. Hold the treadmill firmly with both hands, and lower the

treadmill to the floor. CAUTION: To decrease the possi-
bility of injury, bend your legs and keep your back
straight.

Knob

Summary of Contents for NETL11520



















Reviews: