8
4. Identify the Left Upright (89). Have a second
person hold the Left Upright near the Base (97).
See the inset drawing.
Tie the wire tie in the
Left Upright (89) securely around the end of the
Upright Wire (84). Then, pull the other end of the
wire tie until the Upright Wire is routed through
the Left Upright.
84
4
84
89
Wire
Tie
Wire
Tie
89
97
84
3. Pull the Upright Wire (84) and the base ground
wire (A) through the indicated hole in the
Base (97).
If there is a screw (B) pre-installed in the side of
the Base (97), remove and discard the screw.
Attach the base ground wire (A) to the Base with
a #8 x 1/2" Ground Screw (9).
84
3
97
Hole
9
A
B
