10
8. With the help of a second person, hold the con-
sole assembly near the Left Upright (89).
Connect the Upright Wire (84) to the console
wire.
See the inset drawing. The connectors
should slide together easily and snap into
place.
If they do not, turn one connector and try
again.
IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER.
Then, remove the wire tie from
the Upright Wire.
Connect the wire from the Fan Tray (30) to the
wire from the console assembly.
Console
Assembly
Console
Wire
Wire
Tie
89
30
84
84
Console
Wire
8
Wires
7. Attach a Tray Bracket (105) to the side of the
Left Upright (89) with two #8 x 3/4" Screws (1).
Start both Screws, and then tighten them.
Make sure to use the bracket holes shown.
Attach the other Tray Bracket (not shown)
to the Right Upright (not shown) in the same
way.
Hold the Fan Tray (30) near the Left Upright
(89). Insert the fan wire through the hole in the
side of the Left Upright and pull it out of the top
as shown.
Set the Fan Tray (30) on the Tray Brackets
(105) (only one is shown).
The Fan Tray will be
attached in a later step.
1
105
30
89
Fan
Wire
7
