ICON FIRES Slimline RD380, Manual

Page: 9 / 17

9
2 - Igniting the Slimline Burner
Note: If fuel is left in the burner for a prolonged time or overnight, before next use, open the
Vent for 2 minutes and let it air before ignition, to let the fuel vapour clear, and only then light
Seal the fuel canister used to fill the Burner and move to a safe distance away from the Burner.
While standing at arm's length away from the Burner, use a long arm lighter as per the image
above to introduce a flame to the openings in the
Vent Plate . If the Burner has fuel in the
reservoir but is not igniting, close the Sliding Lid for 5 minutes then open the Sliding Lid . Ensure
there are no flames visible within the burner vent opening, then pour a small amount of fuel
across the length of the
Burner Vent with the supplied plastic bottle (where applicable) and
introduce the flame. This normally happens when the burner has been closed for a day or
more.