ICON FIRES Slimline RD380, Manual

Page: 4 / 17

4
CONTENT OF PACKAGING:
• Burner Body - qty 1
• Slider or Closing lid for Round Burner - qty 1 (2 of for 1400 Burner)
•
Sliding Lid Handle - qty 2 (1 of for 500 and Round Burner)
•
Battery operated Fuel Pump
*
- qty 1 (None for Round Burner)
• Flame reducer rings for round burner - qty 1 x large reducer, 1 x small reducer
*
Australian models are not supplied with a Fuel Pump. They are supplied with the mandatory fuel canister with flame
arrestor
.
MAKE SURE THE FIREPLACE HAS COOLED OFF COMPLETELY BEFORE CLEANING:
To clean dust, wipe with a dry cloth or sponge.
To clean stainless steel parts, use bioethanol or Acetone.
Make sure the Sliding Lid for the Slimline Burner slides correctly and fully after cleaning and
that any excess cleaning product has been wiped off completely.
KEEP HANDY A CLASS ABE FIRE EXTINGUISHER:
Class ABE fire extinguishers are used to put out fires that are caused by combustible liquids. Class ABE fire
extinguishers quell the flames by expelling a dry chemical powder or foam with a nitrogen propellant.
The specific chemical can vary depending on the make or model. Water will not extinguish this flame.
PROCEDURE IF BURNER IS OVERFILLED:
In case of accidental overfilling of the fuel tank, follow these steps:
•
NEVER light the Slimline Burner if it is filled past the filling line by more than 15mm , shown
in the section of
Filling the Slimline Burner.
•
Remove the Slimline Burner from its housing, using the hooks on the back end of the
Sliding Lid Handle or rubber gloves .
•
Empty excess fuel into a container suitable to hold the volume of the Burner, kitchen sink
or toilet bowl.
•
Wipe off all excess fuel that may have dripped on the outside of the Slimline Burner
during emptying and allow any residual fuel to evaporate. Leave for 1 hour.
•
Place the Slimline Burner back into its housing.
•
Ignite the Slimline Burner only once all residual fuel outside the Burner has completely
evaporated and the dispenser used to fill the Burner has been sealed and moved to a
safe distance from the Burner
.
USE CORRECT FUEL : BIOETHANOL