3) Connect the leg massage section air tube with the air tube on the massage chair. Connect the wire
harness of the leg rest to the one from the chair and insert both the air tube and wiring harness into
the seat frame (figure 1). Place the round tube from the left and right sides of the leg rest to the chair
support brackets (figure 2).
4) Close the fixing block on the support hooks of the massage chair seat frame (Fig. 3). Screw the leg
massage section’s fixing blocks with
2 X M4 screws (1 on the left and 1 on the right). Check whether
there is any abnormality with the up-and-down movement and whether the air tube is bent (Fig. 4).
IMPORTANT: Avoid bending the air tube.
Back and head cushions
Install the back and head cushions using the cushion’s zippers.
