![background image](http://html1.mh-extra.com/html/icom/vhf-marine-transceiver-ic-m501euro/vhf-marine-transceiver-ic-m501euro_service-manual_2038216007.webp)
SECTION 3
OPTIONAL UNIT INSTALLATION
3 - 1
CAUTION:
DISCONNECT the DC power cable from the
transceiver before performing any work on the transceiver.
Otherwise, there is danger of electric shock and/or equip-
ment damage.
• Opening the transceiver case
Follow the case opening procedure shown here when you
want to install an optional unit, etc.
q
Remove the 6 screws as shown below and open the trans-
ceiver.
w
Remove the 4 screws from the shielding plate, then lift up
the shielding plate.
e
Plug an optional unit to J6 on the MAIN unit as shown
below.
r
Return the shielding plate and assemble the units to their
original positions.
Optional unit