![background image](http://html1.mh-extra.com/html/icom/vhf-marine-transceiver-ic-m501euro/vhf-marine-transceiver-ic-m501euro_service-manual_2038216004.webp)
1 - 1
SECTION 1
SPECIFICATIONS
‘
‘
GENERAL
• Frequency coverage
: 156.025–157.425 MHz (Tx)
156.025–162.025 MHz (Rx)
• Mode
: 16K0G3E (FM)
• Usable channels
: All international and USA* channels
*availability depending on version
• Power supply requirement
: 13.8 V DC (negative ground)
• Usable temperature range
: –20˚C to +60˚C
• Frequency stability
: ±10 ppm (–20˚C to +60˚C)
• Current drain (at 13.8 V DC)
: Transmit
at 25 W
6.0 A
Receive
max. audio
1.2 A
• Antenna connector
: SO-239 (50
Ω
)
• Dimensions (projections not included)
: 165(W)
×
110(H)
×
109.4(D) mm
• Weight
: 1130 g
‘
‘
TRANSMITTER
• Output power (at 13.8 V DC)
: High
25 W
Low
1 W
• Modulation
: Variable reactance frequency modulation
• Maximum frequency deviation
: ±5.0 kHz
• Spurious emissions
: 0.25 µW
• Adjacent channel power
: 70 dB
• Residual modulation
: 40 dB
• Audio harmonic distortion
: Less than 10% at 60% deviation
• Audio frequency response
: +1 dB to –3 dB of 6 dB octave from 300 Hz to 3000 Hz
• Microphone impedance
: 600
Ω
‘
‘
RECEIVER
• Receive system
: Double conversion superheterodyne system
• Intermediate frequencies
: 1st
21.7 MHz
2nd
450 kHz
• Sensitivity
: 6 dBµ emf at 20 dB SINAD
• Squelch sensitivity
: –10 dBµ at threshhold
• Adjacent channel selectivity
: 70 dB
• Spurious response
: 70 dB
• Intermodulation rejection ratio
: 68 dB
• Hum and noise
: 40 dB
• Audio output power (at 13.8 V DC)
: 3.5 W typical at 10% distortion with an 4
Ω
load
• Audio frequency responce
: +1 dB to –3 dB of –6 dB octave from 300 Hz to 3000 Hz
Specifications are measured in accordance with ETS300-162 2nd Edition
All stated specifications are subject to change without notice or obligation.