![background image](http://html1.mh-extra.com/html/icom/vhf-ic-f50/vhf-ic-f50_service-manual_4284357052.webp)
5 - 1
SECTION 5 ADJUSTMENT PROCEDURES
5-1 PREPARATION
When adjusting IC-F60/F61, the optional CS-F50 ADJ
ADJUSTMENT SOFTWARE
(Rev. 1.0 or later), *OPC-966
JIG CABLE
(modified
OPC-966
CLONING CABLE
) are required.
■
REQUIRED TEST EQUIPMENT
■
SYSTEM REQUIREMENTS
• Microsoft
®
Windows
®
95 or Windows
®
98
• RS-232C serial port
■
ADJUSTMENT SOFTWARE INSTALLATION
q
Boot up Windows.
- Quit all applications when Windows is running.
w
Insert the cloning software CD-ROM into the appropriate
CD-ROM drive.
e
Select ‘Run’ from the [Start] menu.
r
Type the setup program name using the full path name,
then push [Enter] key.
(For example; D:\Setup.exe)
t
Follow the prompts.
y
Program group ‘CS-F50 ADJ’ appears in the ‘Programs’
folder of the [Start] menu.
■
BEFORE STARTING SOFTWARE ADJUSTMENT
Program the adjustment frequencies, listed in page 5-2, into
the transceiver using with the CS-F50 before starting the
software adjustment. Otherwise, the transceiver can not
start software adjustment.
CAUTION!:
BACK UP the originally programed memory
data in the transceiver before progaming the
adjustment frequencies.
When program the adjustment frequencies
into the transceiver, the transceiver’s memory
data will be overwritten and lose original mem-
ory data at the same time.
■
STARTING SOFTWARE ADJUSTMENT
q
Connect IC-F60/F61 and PC with *OPC-966
JIG CABLE
.
w
Turn the transceiver power ON.
e
Boot up Windows, and click the program group ‘CS-F50
ADJ’ in the ‘Programs’ folder of the [Start] menu, then
CS-F50 ADJ’s
window appears.
r
Click ‘Connect’ on the CS-F50’s window, then appears
IC-F60/F61’s up-to-date condition.
t
Set or modify adjustment data as desired.
Microsoft and Windows are registered trademarks of
Microsoft Corporation in the U.S.A. and other countries.
EQUIPMENT
DC power supply
FM deviation meter
Frequency counter
Digital multimeter
RF power meter
(terminated type)
GRADE AND RANGE
Output voltage
: 7.5 V DC
Current capacity
: 5 A or more
Frequency range
: DC–600 MHz
Measuring range
: 0 to ±10 kHz
Frequency range
: 0.1–600 MHz
Frequency accuracy : ±1 ppm or better
Sensitivity
: 100 mV or better
Input impedance
: 10 M
Ω
/V DC or better
Measuring range
: 1–10 W
Frequency range
: 300–600 MHz
Impedance
: 50
Ω
SWR
: Less than 1.2 : 1
EQUIPMENT
Audio generator
Attenuator
Standard signal
generator (SSG)
DC voltmeter
Oscilloscope
AC millivoltmeter
GRADE AND RANGE
Frequency range
: 300–3000 Hz
Output level
: 1–500 mV
Power attenuation
: 40 or 50 dB
Capacity
: 10 W or more
Frequency range
: 300–600 MHz
Output level
: 0.1 µV–32 mV
(–127 to –17 dBm)
Input impedance
: 50 k
Ω
/V DC or better
Frequency range
: DC–20 MHz
Measuring range
: 0.01–20 V
Measuring range
: 10 mV–10 V
Summary of Contents for VHF IC-F50
