7
CONNECTION PORT SETTINgS
7-30
EXT I/O (EXT) screen
Connection Port Settings > EXT I/O (EXT)
■
DTMF Dialing
These items are displayed when “Transceiver” is selected as a connected unit (except for the Transceiver
Model is set to “IC-SAT100.”)
(Connection Port Settings > EXT I/O (EXT) > EXT I/O Port Mode > EXT I/O 1 ~ 4 > Connected Unit)
(Connection Port Settings > EXT I/O (EXT) > EXT I/O > EXT I/O Port)
Edit the DTMF Dialing settings.
3
4
1
2
1
DTMF Dialing
Select whether or not to use the DTMF Dialing function. (Default: Disable)
2
Permissible Tone Gap
Select the period of time to detect that the last digit has been input.
(Default: 5)
• Range: 1 ~ 10 (seconds)
3
OFF-hook Detect Timer
Select the period of time to detect the OFF-hook control signal.
(Default: 400)
• Range: 0 ~ 2000 (milliseconds) in 100 millisecond steps
4
ON-hook Detect Timer
Select the period of time to detect the ON-hook control signal.
(Default: 400)
• Range: 0 ~ 2000 (milliseconds) in 100 millisecond steps
L
3
and
4
are the timers for the Transceiver Special Number. (PBX > Special Number > Transceiver Special Number)
L
2
~
4
are displayed only when the DTMF Dialing (
1
) is set to “Enable.”
