background image

8

2

REMOTE BOX SET MODE

D

 RX Speaker Tuning function

Set the RX Speaker Tuning function to ON or OFF for CON-
TROL HEAD 1 (main). (default: OFF)
This function allows the operator of CONTROL HEAD 1 to 
adjust the output level of the external speaker that is con-
nected to the transceiver’s main unit.

ON  :  The audio output level of the external speaker is adjust-

able with the AF volume control knob on CONTROL 
HEAD 1.

 

     The minimum audio output level must be set to more 

than 1 on the transceiver’s main unit in order to avoid 
muting the audio output.

OFF :  The audio output level of the external speaker is not 

adjustable by CONTROL HEADs.

D

 Intercom function

Set the Intercom function to ON or OFF. (default: ON)
The Intercom function allows CONTROL HEAD operators to 
communicate each other via their microphones.
The optional microphone and the SP-22 

EXTERNAL

 

SPEAKER

 

are required.

ON  :  The  [INTERCOM]  function  is  assigned  to  [P3],  and 

you can enter and exit the Intercom mode by pushing  
[P3 (INTERCOM)].

OFF :  [P3] retains the originally programmed function and the 

Intercom function is OFF.

NOTE:

•  When one CONTROL HEAD enters the Intercom mode, 

the other CONTROL HEAD also enters even if this func-
tion is set to OFF.

•  When this function is set to ON, the key function [Null] 

must be assigned to [P3] by the CS-F9010/F9510 

CLON

-

ING

 

SOFTWARE

 on both CONTROL HEADs for matching 

the CONTROL HEAD’s performance. Ask your dealer for 
details.

Summary of Contents for RMK-4

















Reviews: