background image

D

 Panel Lock function

Set the Panel Lock function to ON or OFF. (default: ON)
The Panel Lock function locks all keys and the dial other than 

 ] and [P4 (PANEL LOCK)].

ON  :  The [PANEL LOCK] function is assigned to [P4], and 

you can toggle the Panel Lock function ON and OFF 
with  pushing  and  holding  [P4  (PANEL  LOCK)]  for 
1 sec.

OFF :  [P4] retains the originally programmed function and the 

Panel Lock function is OFF.

NOTE:

 When this function is set to ON, the key function 

[Null] must be assigned to [P4] by the CS-F9010/F9510 

CLONING

 

SOFTWARE

 on both CONTROL HEADs for match-

ing the CONTROL HEAD’s performance. Ask your dealer 
for details.

D

 TX AF Monitoring function

Set the TX AF Monitoring function to ON or OFF. (default: ON)
This  function  allows  the  operator  of  CONTROL  HEAD  to 
monitor the other side’s communication.
When one CONTROL HEAD operator is communicating, the 
audio can be heard from the SP-22 

EXTERNAL

 

SPEAKER

 on the 

other CONTROL HEAD side.
The optional SP-22 

EXTERNAL

 

SPEAKER

 is required.

D

 Hanger function

Set the Hanger function to ON or OFF. (default: ON)
The microphone “on-hook” function (Hook-on scan) and “off-
hook” functions (Move to Priority A CH and Monitor) are acti-
vated according to this setting.

ON  :  The microphone “on-hook” or “off-hook” functions are 

activated when CONTROL HEAD’s microphone is put 
on (on hook) or taken off (off-hook) it's hanger hook.

OFF :  The microphone “on-hook” function is activated regard-

less of the CONTROL HEAD’s microphone “on-hook” 
and “off-hook”.

NOTE:

 If “ON” is set in both CONTROL HEADs and one of 

the two microphones is taken from its hanger hook, the 
microphone  “off-hook”  functions  are  activated  for  both 
CONTROL HEADs.

7

2

REMOTE BOX SET MODE

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

Summary of Contents for RMK-4

















Reviews: