manualshive.com logo in svg

Icom MA-510TR, Instruction Manual

Share
Download
Icom MA-510TR Instruction Manual Download Page 53

44

8

CONNECTIONS AND INSTALLATION

8

10

15

18

13

11

16

9

14

12

17

1

7

4

2

5

3

6

 

■

MB-132 installation

An optional MB-132 

flush mount kit is used to mount the transponder to a flat surface 

such as an instrument panel.

CAUTION:

 Keep the transponder at least 1 meter (3.3 feet) away from your vessel’s 

magnetic navigation compass.

1.  Using the template on page 50, carefully cut a 

hole in the instrument panel, or wherever you plan to 

mount the transponder.

2.  Slide the transponder through the hole, as shown to 

the right.

3.  Attach the clamps on both sides of the transponder 

using 2 supplied (M5 × 8 mm) bolts.

 

L

Make sure that the clamps align parallel to the 

transponder’s body.

4.  Tighten the end bolts on the clamps (rotate clockwise) 

so that the clamps press firmly against the inside of 

the instrument control panel. (Torque: 0.6 N•m)

5.  Tighten the locking nuts (rotate counterclockwise) so 

that the transponder is securely mounted in position, 

as shown to the right.

6.  Connect the antenna and power cables, then return 

the instrument control panel to its original place.

Summary of Contents for MA-510TR

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands