Icom MA-510TR Instruction Manual Download

Page: 23 / 64

BASIC OPERATION

2
3

Highway screen

Displays the highway information.

1 2

OWN SHIP INDICATOR

Displayed in the center of the compass.

WAYPOINT NAME

Displays the waypoint’s name.

“AIS target” is displayed when

navigating to the AIS target.

“MOB” is displayed while in the MOB

mode. (p. 27)

“Navigation OFF” is displayed when the

Navigation mode is not used.

COMPASS

Displays the direction based on your

COG (Course Over Ground).

XTE

Displays the Cross Track Error.

STEERING DIRECTION

Displayed when the vessel crosses the

XTE (Cross Track Error) limit line.

XTE LIMIT LINE

Displays the limit line that marks when

the vessel goes off course.

NAVIGATION LINE

Displays a line from the start position of

navigation to the AIS target or waypoint.

YOUR VESSEL ICON

Displayed according to the destination's

position.

When your vessel moves less than 2

knots, is displayed.

RNG

Displays the range (RNG) from your

vessel to the target.

AIS and Highway screen

Displays the plotter display and highway

information.

HIGHWAY

Displayed during navigation.

“Navigation OFF” is displayed on the

Highway screen when the Navigation

mode is not used.

See “Highway screen” for details.

INFORMATION

Displays the following information.

•RNG (Range)

•XTE (Cross Track Error)

•SOG (Speed Over Ground)

•COG (Course Over Ground)

Summary of Contents for MA-510TR

































































Search results

Summary of Contents for MA-510TR

Reviews:

Related manuals for MA-510TR

Brands by name

Popular brands

Icom MA-510TR, Instruction Manual

Search results

Summary of Contents for MA-510TR

Reviews:

Related manuals for MA-510TR

Brands by name

Popular brands