Icom MA-510TR Instruction Manual Download Page 2

Page: 2 / 64

Thank you for choosing this Icom product.

This product was designed and built with Icom’s state of the art technology and

craftsmanship. With proper care, this product should provide you with years of trouble-

free operation.

■

Important

READ ALL INSTRUCTIONS

carefully and

completely before using the transponder.

SAVE THIS INSTRUCTION MANUAL

—

This instruction manual contains important

operating instructions for the MA-510TR.

This instruction manual includes some

functions that are usable only when they

are preset by your dealer.

Ask your dealer for details.

■

Features

Large and high contrast 4.3-inch color

TFT LCD

NMEA0183/NMEA 2000/USB

connectivity

Navigation function

Multi-language interface

(English, French, Indonesian, Spanish,

and Vietnamese)

■

Explicit definitions

WORD

DEFINITION

WARNING!

Personal injury, fire hazard

or electric shock may

occur.

CAUTION

Equipment damage may

occur.

NOTE

If disregarded,

inconvenience only. No risk

of personal injury, fire or

electric shock.

■

Définitions explicites

TERME

DÉFINITION

AVERTISSEMENT!

Risque de blessures

corporelles,

d’incendie ou de choc

électrique.

MISE EN GARDE

Risque de dégât

matériel.

REMARQUE

Inconvénient

seulement, en cas

de nonrespect.

Absence de risque de

blessures corporelles,

d’incendie ou de choc

électrique.

Icom is not responsible for the

destruction, damage to, or performance

of any Icom or non-Icom equipment, if the

malfunction is because of:

•Force majeure, including, but not

limited to, fires, earthquakes, storms,

floods, lightning, other natural disasters,

disturbances, riots, war, or radioactive

contamination.

•The use of Icom transponders with any

equipment that is not manufactured or

approved by Icom.

Icom, Icom Inc. and the Icom logo are

registered trademarks of Icom Incorporated

(Japan) in Japan, the United States, the

United Kingdom, Germany, France, Spain,

Russia, Australia, New Zealand, and/or

other countries.

All other products or brands are registered

trademarks or trademarks of their

respective holders.

Summary of Contents for MA-510TR

































































Search results

Summary of Contents for MA-510TR

Reviews:

Brands by name

Popular brands

Icom MA-510TR, Instruction Manual

Search results

Summary of Contents for MA-510TR

Reviews:

Brands by name

Popular brands